The Utilization of Vertical Wind Turbines for Micro Electricity Generation

Budi Riyanto; Abdi Seno; Naf'an Arifian; Sarifuddin

doi:10.51278/ajse.v3i1.1803

Authors

Budi Riyanto Politeknik Pelayaran Sumatera Barat Padang, Indonesia
Abdi Seno Politeknik Pelayaran Sumatera Barat Padang, Indonesia
Naf'an Arifian Politeknik Pelayaran Sumatera Barat Padang, Indonesia
Sarifuddin Politeknik Pelayaran Sumatera Barat Padang, Indonesia

DOI:

https://doi.org/10.51278/ajse.v3i1.1803

Keywords:

Vertical Wind Turbine, Micro Power Plant, Renewable Energy

Abstract

This research is motivated by the rapidly increasing demand for electricity driven by modernization and industrialization, as well as by environmental challenges resulting from reliance on non-renewable fossil energy sources, thereby prompting the search for clean and efficient alternative energy. The aim of this study is to examine the potential and performance of vertical wind turbines as an innovative solution for micro power generation by assessing the efficiency of converting wind energy into electricity and evaluating its economic aspects. An observational research method was employed, incorporating literature review, team discussions, design processes, device construction, and the implementation of testing through both laboratory and field methods. The study was conducted at the Politeknik Pelayaran Sumatera Barat, where the turbine was installed on the roof of a classroom building in a coastal area, taking advantage of favorable geographic conditions and supportive wind characteristics. Data collection involved direct measurements of parameters such as wind speed, turbine and generator RPM, and electrical voltage over designated time intervals, thereby producing data on the variability and operational performance of the turbine. Results indicate that the vertical wind turbine is capable of generating electricity optimally despite fluctuations in wind speed, and it offers advantages in terms of installation flexibility, low operational costs, and energy efficiency with room for improvement. Consequently, the study recommends the development of enhanced aerodynamic designs and more optimal driving mechanisms to accommodate dynamic operational conditions, thereby facilitating the widespread implementation of this solution to support the decentralization of renewable energy systems, reduce reliance on fossil fuels, and strengthen the sustainability of electricity supply.

References

Z. Afidah, Y. Yushardi, and S. Sudarti, "Analysis of the Potential for Wind Power Generation with Vertical Axis Wind Turbines in Sangkapura District, Gresik Regency," J. Engine Energy, Manufacturing, and Mater., vol. 7, no. 1, p. 08, 2023, doi: 10.30588/jeemm.v7i1.1325.

Y. P. Andriyani and K. A. Munastha, "Potential Analysis and Mapping of Wind Turbine Technology Throughout Indonesia," J.ReTiMs, vol. 3, no. 2, pp. 77–82, 2020.

A. Novit, S. Sudarti, and Y. Yushardi, "Analysis of the Use of Windmills as a Renewable Alternative Energy Source," PHYDAGOGIC J. Phys. and Learning, vol. 6, no. 1, 2023, doi: 10.31605/phy.v6i1.3138.

I. Parti, I. Maudiana, and N. Rasmini, "Hybrid System for Solar Power Generation with Wind Power," Semin. Nas. Apply. Ris. Innovation. 6th, vol. 6, no. 1, pp. 57–64, 2020.

S. Serbin, N. Washchilenko, O. Cherednichenko, K. Burunsuz, M. Dzida, and D. Chen, “Application analysis of a hybrid solid oxide fuel cell-gas turbine system for marine power plants,” Ships Offshore Struct., vol. 17, no. 4, pp. 866–876, 2022, two: 10.1080/17445302.2021.1880764.

R. A. Ofosu, E. Normanyo, K. K. Kaberere, S. I. Kamau, and E. K. Otu, “Design of an Electronic Load Controller for Micro Hydro Power Plant Using Fuzzy-PI Controller,” Cogent Eng., vol. 9, no. 1, 2022, two: 10.1080/23311916.2022.2057115.

“The Techno-Economic Performance Assessment of Selected Power Plants in Uganda,” B. Akankunda, M. S. Adaramola, S. K. Nkundabanyanga, T. Kaawaase Kigongo, and N. Mukisa, “The Techno-Economic Performance Assessment of Selected Power Plants in Uganda,” Int. J. Sustain. Energy, vol. 43, no. 1, pp. 1–22, 2024, two: 10.1080/14786451.2024.2350980.

C. O. P. Marpaung and U. Siahaan, "Potential for Utilizing Renewable Energy in the Context of Accelerating Rural Energy Transition in Lamandau Regency, Central Kalimantan Province," Multidiscip. Natl. Proceeding, vol. 1, pp. 188–210, 2023.

M. A. S. Aziz and H. Sukma, "Utilization of wind energy as a source of street lighting energy," J. Ilm. Only. Leather, vol. 9, no. 1, pp. 9–16, 2020.

D. A. Teklemariyem, E. T. Yimer, V. R. Ancha, and B. A. Zeru, “A CFD parametric investigation on velocity increment induced by an empty diffuser with circumferential holes for horizontal axis wind turbine applications,” Cogent Eng., vol. 11, no. 1, p., 2024, two: 10.1080/23311916.2024.2386382.

W. Finnegan et al., “A novel solution for preventing leading edge erosion in wind turbine blades,” J. Struct. Integr. Maint., vol. 6, no. 3, pp. 136–147, 2021, two: 10.1080/24705314.2021.1906091.

N. Wahyuni, Yushardi, and Sudarti, "Holistic Overview: Discussing the Full Potential of Wind as a Renewable Energy Source," J. Researcher. Ilm. Multidisciplinary, vol. 8, no. 6, pp. 17–23, 2024.

M. Wr Febriyani, I. W. Sukerayasa, and C. G. Indra Partha, "Design of an Exhaust Fan Wind Energy Harvesting System Using the Distance of the Horizontal Axis Wind Turbine Exhaust Fan Blades," J. SPECTRUM, vol. 8, no. 2, p. 194, 2021, doi: 10.24843/spectrum.2021.v08.i02.p22.

P. W. Andianti and Yushardi, "Potential of Wind Power Generation as an Alternative for Street Lighting on Bambang Beach, Lumajang Regency," Cultural Tourism J. Ilm. Religion and Culture, vol. 7, no. 2, pp. 123–130, 2022, doi: 10.25078/pariwisata.v7i2.1093.

M. W. Pane, Andreas, and R. Samosir, “The Design of Modified Vertical Wind Turbine With Darrieus Uses Geometry Airfoil NACA 2414,” J. Mech. Eng. Manuf. Mater. Energy, vol. 7, no. 2, pp. 178–187, 2023, doi: 10.31289/jmemme.v7i2.9456.

A. Effendi, M. Novriyanti, A. Y. Dewi, and A. M. N. Putra, "Analysis of the Influence of the Number of Blades on Turbine Rotation in the Utilization of Wind Energy at Ujung Batu Muaro Penjalinan Beach," J. Tech. Electro, vol. 8, no. 2, pp. 134–138, 2019.

J. Morgan and D. Major-Smith, “Quantifying Potential Selection Bias in Observational Research: Simulations and Analyses Exploring Religion and Depression Using a Prospective UK Cohort Study (ALSPAC),” OSF Prep., vol. 1, no. 0, pp. 1–15, 2024, doi: 10.1080/2153599X.2024.2377545.

Suyanta and Etik Puspitasari, "Study of Making Vertical Axis Finned Savonius Wheel Blades for Wind Power Plants (PLTB)," J. Tech. Science and Applications., vol. 9, no. 2, pp. 1–3, 2021, doi: 10.33795/jtia.v9i2.23.

A. Darmawan and F. Winjaya, "Design of a Vertical Axis Wind Turbine as an Alternative Power Supply at Railway Level Crossings," J. Railways. Indonesia., vol. III, no. November, 2019.

U. M. Sugeng, V. Hadi, and B. Setiadi, "Comparative Analysis of 2 and 3 Blade Small Vertical Axis Savonius Type Wind Turbines," Sainstech J. Researcher. And Pengkaj. Science And Technology., vol. 33, no. 4, 2023, doi: 10.37277/stch.v33i4.1749.

A. R. Idris, F. Siampa, N. A. Noor, and S. Thaha, "Design and Construction of a Vertical Axis Wind Power Plant," J. Technol. Electrical, vol. 4, no. 1, p. 28, 2020, doi: 10.31963/elekterika.v4i1.2251.

A. Suryadi and A. Solihin, "Utilization of Savonius Hybrid Solar Cell Wind Turbines as a Remote Area Electricity Generator. Abstract of Proceedings of the National Seminar on Electrical Engineering Volume 5 of 2020," Pros. Semin. Nas. Take. Electro, vol. 5, no. January, pp. 3–8, 2020.

T. A. Miliket, M. B. Ageze, and M. T. Tigabu, “Aerodynamic performance enhancement and computational methods for H-Darrieus vertical axis wind turbines: Review,” Int. J. Green Energy, vol. 19, no. 13, pp. 1428–1465, 2022, doi: 10.1080/15435075.2021.2005605.

K. Wang, M. Zhao, S. Chen, and R. Zha, “Aerodynamic performance analysis of a floating wind turbine with coupled blade rotation and surge motion,” Eng. Appl. Comput. Fluid Mech., vol. 18, no. 1, 2024, doi: 10.1080/19942060.2023.2301524.

M. Dwi Fikako, M. Luqman Bukhori, F. Setiawan, M. Azizzurrahman, and M. Kevin Adam, "Design Making Vertical Axis Wind Turbines (Vawt) and Solar Panels for Utilizing Electrical Energy," Only. STTKD J. Tek. Electron. Engine, vol. 9, no. 2, pp. 349–358, 2023, doi: 10.56521/teknika.v9i2.952.

M. Bastomi, "Experimental Test of the Effect of Width and Height Ratio of Additional Savonius Blades on Darrieus Vertical Axis Wind Turbine Rotor on Self Starting Capability and Number of Turbine Rotations," Technobiz J. Ilm. Program Stud. Master of Tech. Machine, vol. 10, no. 2, pp. 43–48, 2020, doi: 10.35814/teknobiz.v10i2.1518.

S. Das Karmakar and H. Chattopadhyay, “A review of augmentation methods to enhance the performance of vertical axis wind turbine,” Sustain. Energy Technol. Assessments, vol. 53, no. PA, p. 102469, 2022, doi: 10.1016/j.seta.2022.102469.

A. Ghigo, E. Faraggiana, G. Giorgi, G. Mattiazzo, and G. Bracco, “Floating Vertical Axis Wind Turbines for offshore applications among potentialities and challenges: A review,” Renew. Sustain. Energy Rev., vol. 193, no. May 2023, p. 114302, 2024, doi: 10.1016/j.rser.2024.114302.

S. S. Tomar and A. Dewan, “Investigating wake characteristics of savonius turbine for off-grid wind energy: Analyzing operating influences,” Energy, vol. 316, no. June 2024, p. 134563, 2025, doi: 10.1016/j.energy.2025.134563.

A. Ayadi, M. Mosbahi, H. Nasraoui, and Z. Driss, “Investigation of a helical Savonius turbine with a deflector system,” Ocean Eng., vol. 286, no. P2, p. 115655, 2023, doi: 10.1016/j.oceaneng.2023.115655.

A. K. Sleiti, “Tidal power technology review with potential applications in Gulf Stream,” Renew. Sustain. Energy Rev., vol. 69, no. November 2016, pp. 435–441, 2017, doi: 10.1016/j.rser.2016.11.150.

M. Ramezani, D. E. Choe, K. Heydarpour, and B. Koo, “Uncertainty models for the structural design of floating offshore wind turbines: A review,” Renew. Sustain. Energy Rev., vol. 185, no. August, p. 113610, 2023, doi: 10.1016/j.rser.2023.113610.

S. Y. Sun, H. J. Liu, and H. Y. Peng, “Power performance and self-starting features of H-rotor and helical vertical axis wind turbines with different airfoils in turbulence,” Energy Convers. Manag., vol. 292, no. May, p. 117405, 2023, doi: 10.1016/j.enconman.2023.117405.

R. Longo, P. Nicastro, M. Natalini, P. Schito, R. Mereu, and A. Parente, “Impact of urban environment on Savonius wind turbine performance: A numerical perspective,” Renew. Energy, vol. 156, pp. 407–422, 2020, doi: 10.1016/j.renene.2020.03.101.

M. R. Shouman, M. M. Helal, and A. A. El-Haroun, “Numerical prediction of improvement of a Savonius rotor performance with curtaining and fin addition on blade,” Alexandria Eng. J., vol. 61, no. 12, pp. 10689–10699, 2022, doi: 10.1016/j.aej.2022.03.079.

K. M. Alzahrani, J. L. Hee, M. Elsakka, D. Ingham, L. Ma, and M. Pourkashanian, “Techno-economic assessment of vertical axis wind turbine driven RO desalination with compressed air energy storage for remote communities,” Desalination, vol. 592, no. January, p. 118094, 2024, doi: 10.1016/j.desal.2024.118094.

J. Jurasz, B. Bochenek, J. Wieczorek, A. Jaczewski, A. Kies, and M. Figurski, “Energy potential and economic viability of small-scale wind turbines,” Energy, vol. 322, no. February, p. 135608, 2025, doi: 10.1016/j.energy.2025.135608.

A. Testi, T. M. de Souza, and I. C. de B. Trannin, “Technical and economic feasibility of a small vertical axis wind turbine in low wind conditions compared to other power sources for pumping water,” J. Clean. Prod., vol. 470, no. March, p. 143328, 2024, doi: 10.1016/j.jclepro.2024.143328.

Mahyuddin and Usman, "Design and Test of the Darrieus Type-H Vertical Windmill with a Power of 0.31 Hp," J. Ristech (Journal of Research, Science and Technology., vol. 1, no. 1, pp. 27–37, 2019, [Online]. Available: http://jurnal.abulyatama.ac.id/eristechISSN0000-0000

M. Hetharia, S. Hernowo, S. Irianto, and K. Wicaksono, "Utilization of Wind Energy to Generate Electricity," J. Lining, vol. 6, no. 2, pp. 45–57, 2021.

X. Liu, D. Zhao, and N. L. Oo, “CFD investigation on wind power harvesting from small-scale wind turbines for powering residential buildings in New Zealand,” J. R. Soc. New Zeal., pp. 1–28, 2024, doi: 10.1080/03036758.2024.2323488.

H. Zhang, Y. Hu, and W. Wang, “Wind tunnel experimental study on the aerodynamic characteristics of straight-bladed vertical axis wind turbine,” Int. J. Sustain. Energy, vol. 43, no. 1, pp. 1–25, 2024, doi: 10.1080/14786451.2024.2305035.

S. Yoo and S. Oh, “Flow analysis and optimization of a vertical axis wind turbine blade with a dimple,” Eng. Appl. Comput. Fluid Mech., vol. 15, no. 1, pp. 1666–1681, 2021, doi: 10.1080/19942060.2021.1989041.

M. Lajnef et al., “Numerical and experimental investigation for helical savonius rotor performance improvement using novel blade shapes,” Ocean Eng., vol. 309, no. P1, p. 118357, 2024, doi: 10.1016/j.oceaneng.2024.118357.

K. Calautit and C. Johnstone, “State-of-the-art review of micro to small-scale wind energy harvesting technologies for building integration,” Energy Convers. Manag. X, vol. 20, no. August, p. 100457, 2023, doi: 10.1016/j.ecmx.2023.100457.

F. C. Emejeamara and A. S. Tomlin, “A method for estimating the potential power available to building mounted wind turbines within turbulent urban air flows,” Renew. Energy, vol. 153, pp. 787–800, 2020, doi: 10.1016/j.renene.2020.01.123.

A. Vallejo-Díaz, I. Herrera-Moya, A. Fernández-Bonilla, and C. Pereyra-Mariñez, “Wind energy potential assessment of selected locations at two major cities in the Dominican Republic, toward energy matrix decarbonization, with resilience approach,” Therm. Sci. Eng. Prog., vol. 32, no. April, 2022, doi: 10.1016/j.tsep.2022.101313.

A. P. A. Amorim, K. V. Pontes, B. Dorneanu, and H. Arellano-Garcia, “Optimizing microgrid design and operation: A decision-making framework for residential distributed energy systems in Brazil,” Chem. Eng. Res. Of the., vol. 214, no. December 2024, pp. 251–268, 2025, doi: 10.1016/j.cherd.2024.12.033.

I. Campos et al., “Just participation in wind energy: The role of social innovations,” Renew. Sustain. Energy Rev., vol. 209, no. May 2024, 2025, doi: 10.1016/j.rser.2024.115146.

L. Okkonen and O. Lehtonen, “Socio-economic impacts of community wind power projects in Northern Scotland,” Renew. Energy, vol. 85, pp. 826–833, 2016, doi: 10.1016/j.renene.2015.07.047.

M. Selkimäki et al., “Forest landscape shield models for assessing audio-visual disturbances of wind turbines,” J. Approx. Management., vol. 352, no. August 2023, 2024, doi: 10.1016/j.jenvman.2024.120070.