Pengujian Operasional untuk Mengetahui Potensi Kerusakan pada Indikator Mesin Laser Cuting Engraving Dioda 15 Watt

Authors

  • Wulandari Program Studi Teknis Mesin Produksi Dan Perawatan, Indonesia
  • Sairul Effendi Program Studi Teknis Mesin Produksi Dan Perawatan, Indonesia
  • Almadora Anwar Sani Program Studi Teknis Mesin Produksi Dan Perawatan, Indonesia

DOI:

https://doi.org/10.51278/bce.v4i3.1711

Keywords:

Laser Cutting Engraving Machine, Damage Testing

Abstract

This study aims to analyze the potential damage that occurs in the laser cutting engraving machine indicator using a 15 watt diode. The data analysis method in this study adopts a quantitative approach with an experimental design, focusing on a laser cutting engraving machine using a 15 watt diode. Operational testing was carried out through a series of simulations and direct trials on the machine to identify possible damage points and the factors that influence them. By utilizing the real-time performance monitoring method, this study successfully identified several potential damages that were directly related to the stability of the electric current and the duration of use of the machine. These findings are expected to be a reference in improving the reliability of laser cutting engraving machines, as well as reducing the risk of future damage through improving operational procedures and machine maintenance.

References

Adianti, I., T. Adishakti, L., & Hadi Rahmi, D. (2021). Literatur Review: TEKNOLOGI dalam DOKUMENTASI BANGUNAN PUSAKA. SADE : Jurnal Arsitektur, Planologi Dan Teknik Sipil, 1(2), 51–58. https://doi.org/10.29303/sade.v1i2.13

Aji, A. P., & Setiafindari, W. (2023). Analisis Produktivitas Mesin Filling Botol Dengan Metode Overal Equipment Effectiveness Dan Failure Mode And Effect Analysis. Jurnal TRINISTIK: Jurnal Teknik Industri, Bisnis Digital, Dan Teknik Logistik, 2(1), 21–32. https://doi.org/10.20895/trinistik.v2i1.686

Aminuddin, M. N. (2021). Pengembangan Media Pembelajaran Alignment pada Pengembangan Media Pembelajaran Alignment pada Pulley dan Kopling Menggunakan Metode Cahaya Laser dan Dial Indicator pada Mata Kuliah Praktik Alignment. Jurnal Kependidikan, 7(2), 408–416.

Andriyani, R., & Faddila, S. P. (2023). Pengaruh Kesehatan dan Keselamatan Kerja (K3) Terhadap Kinerja Karyawan pada PT. SIIX EMS Indonesia. AKDBB Journal of Economics and Business (AJEB), 2(1), 25–35. https://kampusjurnal.com/index.php/ajeb/article/view/18

Devega, Y., Industri, D. T., Teknik, F., & Diponegoro, U. (2023). Implementation Cause Effect Analysis in Construction Process Block 107 Vse 220073 Multipuepose Vessel Ship To Obtain Opportunities for Improvement ( Pt . United Sindo Perkasa ). Jurnal Teknik Industri, 1–8.

Firdausi, N. I. (2020). PENGGUNAAN MATERIAL BERKELANJUTAN PADA INTERIOR MINI KLASIK. Kaos GL Dergisi, 8(75), 147–154. https://doi.org/10.1016/j.jnc.2020.125798%0Ahttps://doi.org/10.1016/j.smr.2020.02.002%0Ahttp://www.ncbi.nlm.nih.gov/pubmed/810049%0Ahttp://doi.wiley.com/10.1002/anie.197505391%0Ahttp://www.sciencedirect.com/science/article/pii/B9780857090409500205%0Ahttp:

Fitriana, N. (2020). Analisis Risiko Kecelakaan Dan Penyakit Akibat Kerja Di Industri Fabrikasi Gt. Steel Jember.

Iramanda, D. S. (2021). Quality Assurance (Qa) Dan Quality Control (Qc) Cobalt. Jurnal Biosains Pascasarjana, 23(2), 61. https://doi.org/10.20473/jbp.v23i2.2021.61-74

Jannah, N. F., & Praningtyas, E. R. V. (2024). Analisis Manajemen Risiko Pada Percetakan Cv. Arpro178 Dengan Metode Iso 31000. Study of Applied Entrepreneurship, 1(1), 11–22. https://doi.org/10.33830/sae.v1i1.7337

Junior S., S., & Saleh, A. (2022). Analisis Pengaruh Misalignment Pada Kinerja Motor Induksi. Majalah Ilmiah Gema Maritim, 24(1), 18–25. https://doi.org/10.37612/gema-maritim.v24i1.274

Kirom, M. S. (2024). LAPORAN KERJA PRAKTIK di PT. SARI DUMAI OLEO (SDS2) PENERAPAN PREDICTIVE MAINTENANCE MENGGUNAKAN LASER ALIGNMENT TKSA 71.

Kurniawan, A. (2020). Respon Vibrasi Overall dan Temperatur Komponen Mesin Terhadap Misalignment Axial. Kilat, 9(1), 66–73. https://doi.org/10.33322/kilat.v9i1.782

Kurniawan, A. (2022). Analisis Efektivitas Mesin Pengolahan Minyak Dengan Metode Overall Equipment Effectiveness Dan Failure Mode Effect Analyst Pada Pt. Wilmar Nabati Indonesia. JUSTI (Jurnal Sistem Dan Teknik Industri), 3(1), 62. https://doi.org/10.30587/justicb.v3i1.4414

Manurung, M. Y., & Mustofa, F. H. (2022). Usulan Pengendalian Kualitas Proses Pemesinan dan Pengepakan dengan Menggunakan Metode Six Sigma di PT. XYZ. E-Proceeding FTI, November 2021, 1–11. https://eproceeding.itenas.ac.id/index.php/fti/article/view/1756%0Ahttps://eproceeding.itenas.ac.id/index.php/fti/article/download/1756/1497

Pertahanan, T., Lingkungan, T. R., Guna, T., Hilirisasi, P., Sebaai, P., & Link, P. (2020). SEMINAR PENELITIAN DAN PENGABDIAN KEPADA MASYARAKAT (SNP2M) 2020 (TEKNOLOGI DAN SOSIAL SAINS) (Vol. 2020, Issue November).

Pratama, Y. T., & Jamaaluddin, J. (2024a). Monitoring Oil Water Separator on Ship Based on Microcontroller Arduino Mega 2560. Lcd, 529–538. http://dx.doi.org/10.21070/ups.4380

Pratama, Y. T., & Jamaaluddin, J. (2024b). Pemantauan Pemisah Air dan Minyak pada Kapal Berbasis Mikrokontroller Arduino Mega 2560. Indonesian Journal of Applied Technology, 1(2), 1–13. https://doi.org/10.47134/ijat.v1i2.2918

Pujiant, D., Asni B., A., & Kasrani, M. W. (2022). Perancangan Alat Pendeteksi Level Bahaya Kebisingan Area Kerja Berbasis Ardiuno Uno. Foristek, 13(2), 91–101. https://doi.org/10.54757/fs.v13i2.149

Putra, C., Ilmi, N., & Rahman, T. (2022). Evaluasi Pengendalian Risiko pada Pengujian Remotely Operated Vehicle (ROV) dengan Metode Hazard and Operability Study (HAZOP). Jurnal Teknik Industri, 1(2), 81. https://doi.org/10.30659/jurti.1.2.81-93

Sanugra, B. S. (2022). Evaluasi Penerapan Sistem Pengendalian Internal Untuk Persediaan Barang Dagang Pada Pt. Jaya Terang Mandiri. Jurnal Rekam Medis Dan Informasi Kesehatan, 4.

Setyo Pradana, E., & Sulistiyowati, W. (2022). Literature Review: Use of the Taguchi Method for Quality Improvement. PROZIMA (Productivity, Optimization and Manufacturing System Engineering), 6(2), 85–96. https://doi.org/10.21070/prozima.v6i2.1575

Sulaiman, N., & Faiqoh, E. (2023). KEPADA SISWA TEKNIK GRAFIKA UNTUK MENDUKUNG PELAKSANAAN TEACHING FACTORY DI SMKN 4 GOWA. 2, 18–27.

Suseno, & Angga Prasetya Aji. (2022). Analisis Produktivitas Mesin Pembuatan Assp Dengan Metode Overal Equipment Effectiveness (Oee) Dan Failure Mode and Effect Analysis (Fmea) Pada Pt Merapi Medika Solusindo. Jurnal Cakrawala Ilmiah, 1(6), 1609–1624. https://doi.org/10.53625/jcijurnalcakrawalailmiah.v1i6.1527

Downloads

Published

2024-12-30

How to Cite

Wulandari, Sairul Effendi, & Almadora Anwar Sani. (2024). Pengujian Operasional untuk Mengetahui Potensi Kerusakan pada Indikator Mesin Laser Cuting Engraving Dioda 15 Watt. Bulletin of Community Engagement, 4(3), 861–875. https://doi.org/10.51278/bce.v4i3.1711

Issue

Vol. 4 No. 3 (2024): Bulletin of Community Engagement

Section

Articles

License

Copyright (c) 2025 Wulandari, Sairul Effendi, Almadora Anwar Sani

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Most read articles by the same author(s)

Obs.: This plugin requires at least one statistics/report plugin to be enabled. If your statistics plugins provide more than one metric then please also select a main metric on the admin's site settings page and/or on the journal manager's settings pages.