Utilization of Electric Bicycle Trainers as Learning Media to Support the Challenges of the Industrial Revolution 4.0 at SMK N 2 Probolinggo
DOI:
https://doi.org/10.51278/bce.v4i3.1553Keywords:
SMKN 2 Probolinggo, Electric Motorcycle Trainer, Industrial Revolution 4.0Abstract
In the contemporary era marked by the beginning of the Fourth Industrial Revolution (4.0), the world of education faces unprecedented challenges in preparing students to face the demands of a rapidly evolving technological and industrial environment. In response, educational institutions, especially vocational schools such as SMK N 2 Probolinggo, strive to improve the competencies of their students so that they can effectively navigate and contribute to the demands of the Industrial Revolution 4.0. This research initiative stems from the awareness of the critical need to align educational practices with emerging trends and the requirements of the contemporary industrial landscape. SMK N 2 Probolinggo recognizes the importance of equipping its students with relevant skills and competencies that will enable them to thrive in an industry marked by automation, digitalization, and technological advancement. The use of electric bicycle trainers as a new learning medium signifies a proactive approach in integrating innovative pedagogical methods with real-world technology applications. By utilizing electric bicycle trainers, students are provided with hands-on experiences that simulate real-world scenarios, enabling them to develop technical proficiency, problem-solving skills, and adaptability that are essential for success in the Industrial Revolution 4.0
References
Ariza, J. Á., & Olatunde-Aiyedun, T. G. (2023). Bringing Project-Based Learning into Renewable and Sustainable Energy Education: A Case Study on the Development of the Electric Vehicle EOLO. Sustainability, 15(13), 10275.
Badilla-Quintana, M. G., & Sandoval-Henríquez, F. J. (2021). Students’ immersive experience in initial teacher training in a virtual world to promote sustainable education: Interactivity, presence, and flow. Sustainability, 13(22), 12780.
Benis, A., Amador Nelke, S., & Winokur, M. (2021). Training the Next Industrial Engineers and Managers about Industry 4.0: A case study about challenges and opportunities in the COVID-19 Era. Sensors, 21(9), 2905.
Carella, G., & Colombo, F. (2024). Teaching Design and actively applying it through project-based learning format: A practical case study of a collaboration between a university course and a company. INTED PROCEEDINGS, 2391–2398.
Costa, M. C., Domingos, A. M. D., Teodoro, V. D., & Vinhas, É. M. R. G. (2022). Teacher professional development in STEM education: An integrated approach with real-world scenarios in Portugal. Mathematics, 10(21), 3944.
Faiz, M. R., Falah, M. Z., & Syah, A. I. (2022). Development of Teaching Modules for Operation and System Stability Courses as a Pilot Project for the Electrical Engineering Study Program Towards Independent Learning. International Journal of Research in Vocational Studies (IJRVOCAS), 1(4), 41–45.
Falah, M. Z., Handoko, W. T., Syah, A. I., Afifah, F. W., & Sanjaya, S. D. (2023). The Future of Islamic Education: Breaking Through Boundaries with Line Follower Robot Trainers Toward the Era of Society 5.0. Syaikhuna: Jurnal Pendidikan dan Pranata Islam, 14(02), 162–171.
Garcés, G., & Peña, C. (2022). Adapting engineering education to BIM and industry 4.0: A view from Kolb’s experiential theory in the laboratory. INGENIARE-Revista Chilena de Ingeniería, 30(3). https://www.researchgate.net/profile/Gonzalo-Garces/publication/365297415_Adapting_engineering_education_to_BIM_and_industry_40_A_view_from_Kolb's_experiential_theory_in_the_laboratory/links/6374e0cf37878b3e87b75b44/Adapting-engineering-education-to-BIM-and-industry-40-A-view-from-Kolbs-experiential-theory-in-the-laboratory.pdf
Gwangwava, N. (2021). Learning design thinking through a hands-on learning model. International Journal of Innovative Teaching and Learning in Higher Education (IJITLHE), 2(1), 1–19.
Handoko, W. T., Falah, M. Z., Syah, A. I., Azhari, M. H. R., Ningtiaz, P. G., & Handayani, A. N. (2023). IMPROVING THE QUALITY OF LEARNING IN THE TKJ DEPARTMENT THROUGH THE LINE FOLLOWER ROBOT TRAINER AT SMK NU 1 KARANGGENENG. Community Development Journal: Jurnal Pengabdian Masyarakat, 4(5), 10037–10042.
Hernandez-de-Menendez, M., Escobar Díaz, C., & Morales-Menendez, R. (2020). Technologies for the future of learning: State of the art. International Journal on Interactive Design and Manufacturing (IJIDeM), 14(2), 683–695.
Ibrahim, A. A. E. (2021). New Learning Paths: Technology Transformations, Challenges, and Sustainable Educational Practices. EXPLORING SUSTAINABLE PATHS, 171.
Kurniawan, C., Pramika, D., Hodsay, Z., Gunawan, H., & Yulaini, E. (2021). Peningkatan Kemampuan SDM Sekolah dalam Menghadapi Revolusi Industri 4.0 di SMK 2 OKU Selatan. Wahana Dedikasi: Jurnal PkM Ilmu Kependidikan, 4(2), 40–46.
Laurens, J., Rampo, Y., Tamba, P., & Sumarauw, H. (2021). Pengaruh media pembelajaran trainer simulator kelistrikan terhadap hasil belajar pemeliharaan listrik siswa TSM di SMK Kristen Getsemani Manado. GEARBOX: Jurnal Pendidikan Teknik Mesin, 50–58.
Maulana, Y. (2023). Desain Trainer Inverter 3 Phasa Untuk Mata Kuliah Elektronika Daya Di Program Studi Pendidikan Teknik Elektro. [PhD Thesis, UIN Ar-Raniry Banda Aceh]. https://repository.ar-raniry.ac.id/id/eprint/30950/
Misbahudin, A. S. (2023). Rancang bangun pembangkit listrik menggunakan Alternator yang digerakkan oleh Roller Trainer sepeda [PhD Thesis, UIN Sunan Gunung Djati Bandung]. https://etheses.uinsgd.ac.id/68648/
Sasmito, G. W., & Wijayanto, S. (2020). Studi pengenalan internet of things bagi guru dan siswa SMK Bina Nusa Slawi sebagai wawasan salah satu ciri revolusi industri 4.0. Dinamisia: Jurnal Pengabdian Kepada Masyarakat, 4(1), 186–194.
Setyanto, B. N., Budiastuti, P., Rismarinandyo, M. Y., & Yulanda, R. F. (2023). Pengembangan Alat Peraga Sepeda Listrik Portabel Sebagai Media Pembelajaran Elektronika Daya. JUPITER (JURNAL PENDIDIKAN TEKNIK ELEKTRO), 8(1), 39–46.
Singhaphandu, R., & Pannakkong, W. (2024). A Review on Enabling Technologies of Industrial Virtual Training Systems. International Journal of Knowledge and Systems Science (IJKSS), 15(1), 1–33.
Sitorus, M. B., Gifson, A., Mangapul, J., & Aziz, H. (2020). Pelatihan Mikrokontroler Dalam Pengenalan Robotika Sebagai Respon Revolusi Industri 4.0 Di SMK Media Informatika Dasana Indah Tengerang. TERANG, 2(2), 144–150.
Sugiarto, T., Zalinus, N., Refdinal, R., Purwanto, W., & Arif, A. (2022). Kompetensi Lulusan SMK Program Studi Teknik Otomotif Sesuai Dengan Tuntutan Revolusi Industri 4.0: Kajian Literatur. AEEJ: Journal of Automotive Engineering and Vocational Education, 3(2), 131–138.
Sujito, S., Elmunsyah, H., Sumarli, S., Syah, A. I., Falah, M. Z., & Nugroho, Z. S. (2022). PENGEMBANGAN TRAINER AIR CONDITIONER (AC) UNTUK MENINGKATKAN KOMPETENSI KEAHLIAN TEKNIK KENDARAAN RINGAN OTOMOTIF PADA ERA SOCIETY 5.0 DI SMK NU 1 KARANGGENENG. Prosiding Hapemas, 3(1), Article 1.
Sulistyanto, S., Mutohhari, F., Kurniawan, A., & Ratnawati, D. (2021). Kebutuhan kompetensi dalam pasar tenaga kerja di era revolusi industri 4.0 bagi siswa SMK. Jurnal Taman Vokasi, 9(1), 25–35.
Widianto, M. F. (2023). Optimasi Topologi Frame Sepeda Listrik dengan Software Altair Inspire Menggunakan Metode Backpropagation Neural Network-Genetic Algorithm [PhD Thesis, Institut Teknologi Sepuluh Nopember]. https://repository.its.ac.id/102144/
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Moh Zainul Falah, Wahyu Tri Handoko, Abdullah Iskandar Syah, Febiolola Milinia Triana, Ghasa Faraasyatul 'Alam, Fuad Indra Kusuma
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
