Peningkatan Keterampilan Teknik Siswa SMK Nasional Dawarblandong melalui Pembelajaran Berbasis Proyek dengan Pendekatan Otomasi pada Alat Pertanian

Authors

  • Joessianto Eko Poetro Politeknik Perkapalan Negeri Surabaya, Indonesia
  • Agus Khumaidi Politeknik Perkapalan Negeri Surabaya, Indonesia
  • Imam Sutrisno Politeknik Perkapalan Negeri Surabaya, Indonesia
  • Ii Munadhif Politeknik Perkapalan Negeri Surabaya, Indonesia
  • Mochammad Rifai Politeknik Penerbangan Makassar, Indonesia

DOI:

https://doi.org/10.51278/bce.v4i2.1354

Keywords:

Project Based Learning, Agricultural Equipment Automation, Engineering Skills

Abstract

This service aims to improve the technical skills of Dawarblan-dong National Vocational School students through project-based learning with an automation approach to agricultural equipment. The service method used is class action service. The service instruments used are observation, tests and interviews. The service subjects were 30 students of class XI Automotive Light Vehicle Engineering. Data were analyzed using descriptive statistics. The results of the service show that project-based learning with an automation approach to agricultural equipment can significantly improve the technical skills of Dawarblandong National Vocational School students. This is proven by the increase in student test scores from an average of 65.00 to 80.00 after taking part in the learning. Apart from that, the results of observations show that students become more active and creative in learning. Students are also more motivated to learn and complete projects. The results of the interviews showed that students felt happy and challenged by project-based learning with an automation approach to agricultural equipment. Project-based learning with an automation approach to agricultural tools can be an effective learning alternative for improving the technical skills of Dawarblan-dong National Vocational School students. This learning can improve students' knowledge, skills and attitudes in the field of engineering.

References

Anfasa, I. and Sutrisno, I. (2021). RANCANG BANGUN INTEGRASI SCADA PADA SISTEM CRUSHING DAN BARGE LOADING CONVEYOR. Jurnal Conference on Automation Engineering and Its Application.

Anggoro, R. D., & Munaf, R. (2020). Analysis of Factors Causing Speedboat Accidents in Tanjung Benoa, Bali, Indonesia. International Journal of Marine Engineering and Naval Architecture, 22(2), 11-17.

Ardhana, V. Y. P. et al (2021). Design automatic waitress in android based restaurant using MQTT communication protocol. IOP Conf. Series: Materials Science and Engineering 1175 (2021) 012009

Danis B, Agus K, Projek P, Mohammad B, and Sutrisno, I. (2019). Ball Direction Prediction for Wheeled Soccer Robot Goalkeeper Using Trigonometry Technique. Applied Technology and Computing Science Journal.

Budianto, I. et al (2020). Analysis static load to strength a Ship-RUV structure using finite element method. IOP Conf. Series: Materials Science and Engineering 1175 (2021) 012017.

Hakim, A. S., & Munaf, R. (2019). Analysis of Speedboat Accidents in Waters of Tanjung Benoa, Bali, Indonesia. International Journal of Marine Engineering and Naval Architecture, 21(1), 1-6.

Hananur, R. N. and Sutrisno, I. (2018). Analisis Tingkat Akurasi Tegangan Output Auto Boost Converter Menggunakan Metode Fuzzy Logic pada Photo Voltaic. Seminar MASTER PPNS.

Hasugian, S., Rahmawati, M. and Sutrisno, I. (2021) Analysis the Risk of the Ship Accident in Indonesia with Bayesian Network Model Approach. Annals of R.S.C.B., ISSN:1583-6258, Vol. 25, Issue 2, Pages. 3341 - 3356

Hayati, N. F., & Munaf, R. (2018). Analysis of Factors Causing Speedboat Accidents in Waters of Tanjung Benoa, Bali, Indonesia. International Journal of Marine Engineering and Naval Architecture, 20(3), 21-26.

Iskandar, Dewa, P., and Sutrisno, I. (2022). Prototype of Bridge Navigational Watch Alarm System Equipped Obstacle Warning System Based on Image Processing and Real-Time Tracking. International journal of Marine Engineering and Research. Volume 7. No 1.

Jami’in, M. A., Sutrisno, I., and Hu, J. (2015). The State-Dynamic-Error-Based Switching Control under Quasi-ARX Neural Network Model. AROB 20th B-Con Plaza, Beppu, Japan

Khumaidi, A. et al (2018). Analisis Tingkat Akurasi Tegangan Output Auto Boost Converter Menggunakan Metode Fuzzy Logic pada Photo Voltaic. Seminar MASTER PPNS.

Kurniawan, A., & Munaf, R. (2017). Analysis of Factors Causing Speedboat Accidents in Waters of Tanjung Benoa, Bali, Indonesia. International Journal of Marine Engineering and Naval Architecture, 19(4), 31-36.

Mohammad B, Sutrisno, I., Budianto, Santosa, A. W. B., and Nofandi, F (2020). Vibration Analysis of Ship-RUV Structure in Operational Conditions. IOP Conf. Series: Earth and Environmental Science 519 012045

Munaf, R., & Handayani, H. F. (2016). Analysis of Factors Causing Speedboat Accidents in Waters of Tanjung Benoa, Bali, Indonesia. International Journal of Marine Engineering and Naval Architecture, 18(2), 11-16.

Rifai, M., et al (2021). Dynamic time distribution system monitoring on traffic light using image processing and convolutional neural network method. IOP Conf. Series: Materials Science and Engineering 1175.

Sutrisno, M. and Muhammad F, dkk, (2019). Implementation of Backpropagation Neural Network and Extreme Learning Machine of pH Neutralization Prototype. IOP Conf. Series: Journal of Physics: Conf. Series 1196 012048

Sutrisno, I. (2009). Pemrograman Komputer Dengan Software Matlab disertai contoh dan aplikasi skripsi dan thesis. ITS Press.

Sutrisno, I., et al (2013). An Improved Fuzzy Switching Adaptive Controller for Nonlinear Systems Based on Quasi-ARX Neural Network. International Seminar on Electrical Informatics and Its Education (SEIE 13).

Sutrisno, I. et al (2013). Implementation of Lyapunov Learning Algorithm for Fuzzy Switching Adaptive Controller Modeled Under Quasi-ARX Neural Network. Inter. Conference on Measurement, Information and Control

Sutrisno, I., et al (2014). Nonlinear Model-Predictive Control Based on Quasi-ARX Radial-Basis Function-Neural-Network. 2014 8th Asia Modelling Symposium.

Sutrisno, I., Che, C. and Hu, J. (2014). Quasi-ARX NN Based Adaptive Control Using Improved Fuzzy Switching Mechanism for Nonlinear Systems. AROB 19th B-Con Plaza, Beppu, Japan.

Sutrisno, I. and Jami’in, M. A. (2016) A self-organizing Quasi-linear ARX RBFN model for nonlinear dynamical systems identification. SICE Journal of Control, Measurement, and System Integration.

Sutrisno, I., and Albiyan, W. (2020). Design of Pothole Detector Using Gray Level Co-occurrence Matrix (GLCM) And Neural Network (NN). IOP Conf. Series: Materials Science and Engineering 874 (2020) 012012

Sutrisno, I. et al (2020). Vibration Analysis of Ship-RUV Structure In Operational. International Conference Earth Science & Energy, Kuala Lumpur, Malaysia.

Downloads

Published

2024-08-01

How to Cite

Joessianto Eko Poetro, Agus Khumaidi, Imam Sutrisno, Ii Munadhif, & Mochammad Rifai. (2024). Peningkatan Keterampilan Teknik Siswa SMK Nasional Dawarblandong melalui Pembelajaran Berbasis Proyek dengan Pendekatan Otomasi pada Alat Pertanian. Bulletin of Community Engagement, 4(2), 166–171. https://doi.org/10.51278/bce.v4i2.1354

Most read articles by the same author(s)

Obs.: This plugin requires at least one statistics/report plugin to be enabled. If your statistics plugins provide more than one metric then please also select a main metric on the admin's site settings page and/or on the journal manager's settings pages.